Description
Description:
The L78M05CV is a fixed output, three terminal precision positive voltage regulator in 3 pins TO-220 package. This regulator can provide local on-card regulation by eliminating distribution problems associated with single point regulation. The L78M05CV fixed voltage regulator is designed with thermal overload protection that shuts down the circuit when subjected to an excessive power overload condition, internal short circuit protection that limits maximum current the circuit will pass and output transistor safe area compensation that reduces the output short circuit as the voltage across the pass transistor is increased. If adequate heat sinking is provided then this positive voltage regulator can deliver over 0.5A output current.
Specification:
| Product Series | L78M |
| No. of Output | 1 |
| Output Type | Fixed |
| Polarity | Positive |
| Input Voltage Range | 7V to 35V |
| Output Voltage | 5 V |
| Output Current | 500 mA |
| Operating Temperature Range | 0°C to 125°C |
| Load Regulation | 100 mV |
| Line Regulation | 100 mV |
Features:
- Fixed output voltage is 5V
- Output current is 0.5A
- Dropout voltage is 2V
- Maximum DC input voltage is 35V
- Output transition SOA protection
- Output voltage tolerance is 4%
- Operating temperature range 0°C to 125°C
- Applications: Power Management.
Pin Description:
| Pin No. | Pin | Function | Description |
| 1 | INPUT | Input voltage (7V-35V) | In this pin of the IC positive unregulated voltage is given in regulation. |
| 2 | GROUND | Ground (0V) | In this pin where the ground is given. This pin is neutral for equally the input and output. |
| 3 | OUTPUT | Regulated output; 5V (4.8V-5.2V) | The output of the regulated 5V volt is taken out at this pin of the IC regulator. |
Datasheet:
Package Included:
1 x Voltage Regulator 7805
2x18650 Battery Holder Black Plastic Storage Box Case Holder For Battery 2 x 18650 Cell Box, Without Cover 
500pcs LED Diode Lights, 5 Colors×100pcs 5mm Light Emitting Diodes LED Assortment Kit 
DC Motor Fan Blade 3-Wing Fan For Toy Motor Round Shape - Yellow 
3S 60A Li-ion BMS Board 18650 Battery Charger Protection Circuit 3S 60A BMS For Li-ion Batteries Three-Cell Li-ion Battery Protection Module - Standard Version 
Raspberry Pi High Quality Camera RPi Cam High Quality High-Resolution Premium Camera Module C/CS Mount Or M12 Mount For Your Pi Projects 
86HS68-5904-08J NEMA34 Stepper Motor 34 kgcm Holding Torque Stepper Motor for High-Torque and Heavy-Load Applications 
SG90 Servo Motor 9g Mini/Micro Servo Motor 180 Degrees 
4S 12A BMS Board 14.8v Li-Ion Battery Protection Board 18650 Li-ion Lithium Battery Protection and Charger BMS Module 
Readytosky 80A 2-6S Brushless ESC 2-6S Brushless Electronic Speed Controller (ESC) High Power 80A ESC For FPV Racing Drones and Quadcopters 
Degson 5mm Pitch PCB Terminal Block Degson 3 Pin 5mm PCB Terminal Block PCB Mount Screw Terminal Block Terminal Blocks Connectors High Quality 
iMAX B6AC Charger iMAX B6 LCD Screen Digital RC Lipo NiMh Battery Balance Charger B6AC Lipo Charging XT60/T Plug Adaptor Board 2-6S 
Official Raspberry Pi 5 Case Red and White Raspberry Pi 5 ABS Case Raspberry Pi 5 Active Cooling PWM Fan Protection 
3-in-1 Copper Heat Sink for Raspberry Pi 3-in-1 Heat Sink Self-Adhesive Heat Sink CPU Cooler for Raspberry Pi 2/ Pi 3/ Pi 3B+/ Pi 4 
DC 9V Battery Snapper Connector With DC Jack Button Power Cable For Arduino 
Waveshare 3.5inch Resistive Touch Screen LCD, 480×320, HDMI, IPS, Various Devices & Systems Support 
10K Ohm Resistor, 10K Ohm Resistance 1/4W Power Rating 5%
Reviews
There are no reviews yet.