Description
Description:
The L78M05CV is a fixed output, three terminal precision positive voltage regulator in 3 pins TO-220 package. This regulator can provide local on-card regulation by eliminating distribution problems associated with single point regulation. The L78M05CV fixed voltage regulator is designed with thermal overload protection that shuts down the circuit when subjected to an excessive power overload condition, internal short circuit protection that limits maximum current the circuit will pass and output transistor safe area compensation that reduces the output short circuit as the voltage across the pass transistor is increased. If adequate heat sinking is provided then this positive voltage regulator can deliver over 0.5A output current.
Specification:
| Product Series | L78M |
| No. of Output | 1 |
| Output Type | Fixed |
| Polarity | Positive |
| Input Voltage Range | 7V to 35V |
| Output Voltage | 5 V |
| Output Current | 500 mA |
| Operating Temperature Range | 0°C to 125°C |
| Load Regulation | 100 mV |
| Line Regulation | 100 mV |
Features:
- Fixed output voltage is 5V
- Output current is 0.5A
- Dropout voltage is 2V
- Maximum DC input voltage is 35V
- Output transition SOA protection
- Output voltage tolerance is 4%
- Operating temperature range 0°C to 125°C
- Applications: Power Management.
Pin Description:
| Pin No. | Pin | Function | Description |
| 1 | INPUT | Input voltage (7V-35V) | In this pin of the IC positive unregulated voltage is given in regulation. |
| 2 | GROUND | Ground (0V) | In this pin where the ground is given. This pin is neutral for equally the input and output. |
| 3 | OUTPUT | Regulated output; 5V (4.8V-5.2V) | The output of the regulated 5V volt is taken out at this pin of the IC regulator. |
Datasheet:
Package Included:
1 x Voltage Regulator 7805






NEMA23 10.1 kg-cm Hybrid Stepper Motor
PBS-11B Round Plastic Self-Reset Switch 12mm 2-Pin Momentary Push Button Switch For Quick On/Off Control
Smart Robot Car 2WD Chassis Kit with Ultrasonic Module R3 Board
4S 12A BMS Board 14.8v Li-Ion Battery Protection Board 18650 Li-ion Lithium Battery Protection and Charger BMS Module
Official Raspberry Pi Zero Case Compatible with Raspberry Pi Zero, Zero W, Zero 2W
16x2 LCD Display Arduino Compatible 16*2 LCD 1602 LCD (Blue Backlight)
ARDUIN0 Nano V3.0, Nano Board ATmega328P 5V 16M Micro-Controller Board with USB Cable
5S 15A BMS Board 5S 18.5V 15A Li-Ion Lithium Battery Protection Board
Crystal Emerald Green PLA PRO+
4.8 kg-cm NEMA17 Stepper Motor NEMA17 4.8 kg-cm Stepper Motor with Detachable 72 CM Cable
Reviews
There are no reviews yet.