Description
Description:
The L78M05CV is a fixed output, three terminal precision positive voltage regulator in 3 pins TO-220 package. This regulator can provide local on-card regulation by eliminating distribution problems associated with single point regulation. The L78M05CV fixed voltage regulator is designed with thermal overload protection that shuts down the circuit when subjected to an excessive power overload condition, internal short circuit protection that limits maximum current the circuit will pass and output transistor safe area compensation that reduces the output short circuit as the voltage across the pass transistor is increased. If adequate heat sinking is provided then this positive voltage regulator can deliver over 0.5A output current.
Specification:
| Product Series | L78M |
| No. of Output | 1 |
| Output Type | Fixed |
| Polarity | Positive |
| Input Voltage Range | 7V to 35V |
| Output Voltage | 5 V |
| Output Current | 500 mA |
| Operating Temperature Range | 0°C to 125°C |
| Load Regulation | 100 mV |
| Line Regulation | 100 mV |
Features:
- Fixed output voltage is 5V
- Output current is 0.5A
- Dropout voltage is 2V
- Maximum DC input voltage is 35V
- Output transition SOA protection
- Output voltage tolerance is 4%
- Operating temperature range 0°C to 125°C
- Applications: Power Management.
Pin Description:
| Pin No. | Pin | Function | Description |
| 1 | INPUT | Input voltage (7V-35V) | In this pin of the IC positive unregulated voltage is given in regulation. |
| 2 | GROUND | Ground (0V) | In this pin where the ground is given. This pin is neutral for equally the input and output. |
| 3 | OUTPUT | Regulated output; 5V (4.8V-5.2V) | The output of the regulated 5V volt is taken out at this pin of the IC regulator. |
Datasheet:
Package Included:
1 x Voltage Regulator 7805
Radiolink R7FG RC Receiver R7FG 7 Channels RC Gyro Receiver, Voltage Telemetry Long Range Control, Water-Splash Proof for RC Crawler Drifting Car, Boat, Works for 2.4Gh Radio Controller RC8X/RC4GS V3/RC6GS V3/T8S/T8FB 
3.5mm Terminal Connector 3.5mm Pitch 2 pin 2 way Straight Pin PCB Screw Terminal Block Connector 
Radiolink R4FGM RC Receiver R4FGM 2.4Ghz 4 Channels Tiny RC Gyro Receiver For Mini RC Cars 1/28 and Boats, Long Control Distance for Radio RC8X RC4GS V3/RC6GS V3/T8S/T8FB 
PBS-11B Round Plastic Self-Reset Switch 12mm 2-Pin Momentary Push Button Switch For Quick On/Off Control 
300 RPM Single Shaft BO rectangle Motor 
30A ESC 30A BLDC ESC Electronic Speed Controller with Connector 
Bambu Lab A1 Mini 3D Printer
Reviews
There are no reviews yet.