Description
Description:
The OV5647 5MP 1080P IR-Cut Camera for Raspberry Pi 3 and 4 with Automatic Day Night Mode Switching is a custom-designed add-on for Raspberry Pi. It attaches to Raspberry Pi by way of one of the small sockets on the board’s upper surface. This uses the dedicated Raspberry Pi’s onboard CSI interface, designed especially for interfacing with cameras. The camera supports night vision. It is compatible with all revisions of the Pi. Powered with a 5-megapixel OV5647 sensor, its best resolution is 1080p.
 Specifications:
| Model | OV5647 5MP 1080P IR-Cut Camera |
| Resolution | 1080p |
| Sensor | OV5647 |
| Camera | 5MP |
| CCD Size | 1/4inch |
| Aperture (F) | 1.8 |
| Focal Length | 3.6mm adjustable |
| Output Power for IR LED | 3.3~5v |
| Diagonal angle | 60 degree |
Features:
- Raspberry Pi Camera, supports all revisions of the Pi
- Embedded IR-CUT filter, eliminating color distortion due to IR light in the daylight
- Comes with infrared LED, supports night vision
- 5-megapixel OV5647 sensor
- Can Attach IR LEDs if Night Vision mode is required
- The screw hole on the camera is used to both fix the infrared lights and through the power for the lights.
Package Included:
- 1 x OV5647 5MP 1080P IR-Cut Camera
- 1 x 15-pin FFC Ribbon cable Strip





X7 3DR Radio Telemetry Open Source 5KM 1000mW 1W 915MHz for APM Pixhawk Flight Controller - 915MHz
Bambu Lab P1S Combo P1S 3D Printer and AMS
FS-SM100 USB Simulator Cable with Adapter Cables for Flysky FS-i6 FS-i4 FS-TH9X FS-T6 FS-T4B FS-GT3 FS-GT2 Remote Controller
Crystal Clear PLA PRO+
Raspberry Pi Telephoto Lens 16mm RPi Telephoto Lens High-Quality 16mm Telephoto Lens Zoom In On The Details With A 16mm Telephoto Lens
10.1" LCD Display IPS LCD Screen 1280×800 With Driver Board Kit Raspberry Pi Compatible With and All Version of Pi
DALY 4S 12V 100A BMS Board LifePo4 Battery Protection Board Battery Management System
Crystal Emerald Green PLA PRO+
2450KV Brushless Motor A2212 2450KV BLDC Brushless Motor A2212 For Aircraft F450 Quadcopter Helicopter
Waveshare 3.5inch Resistive Touch Screen LCD, 480×320, HDMI, IPS, Various Devices & Systems Support
SG90 Servo Motor 9g Mini/Micro Servo Motor 180 Degrees
Waveshare 2.8inch Resistive Touch LCD, 320x240, Raspberry Pi/Arduino
Solderless Breadboard 830 Tie Points MB102
Raspberry Pi 3 A+ Pi 3 Model A Plus SBC Board Cortex A53-512 MB RAM
Radiolink R6FG RC Receiver R6FG 6 Channels 2.4GHz RC Receiver with Gyro, Surface Long Range Control RX for Vehicle Drifting/Crawler/Truck/Boat Works with Radio Controller RC4GS V3/RC6GS V3/RC4GS V2/RC6GS V2/T8FB/T8S
Reviews
There are no reviews yet.